Laboratory Ergonomic Solutions

1. Alternative pipettes

• Rainin -- 1-800-828-2788. Website at http://www.rainin.com.
• Biohit –1-800-922-0784. Website at http://www.biohit.com.
• Finnpipette – 1-650-595-0108. Website at http://www.thermo.com/com/CDA/Category/CategoryFrames/1,2213,369,00.html

2. Microtube accessories

• Rainin – 1-800-828-2788; Jimmy Microtube Opener, Item #PJ-4A.
• Research Products International Corporation – 1-800-323-9814.
• Foam insert for Vortexer (contact your storeroom for ordering information)

3. Soften sharp edges

• Alimed (1-800-225-2610) offers several designs of soft vinyl foam that can be positioned directly on the front edge of the work surface to soften the edge.
• WorkRite offers a desktop edge that attaches to the counter with supplied Velcro.

4. Changing microscope height

• If the microscope is lightweight, stackable risers may be sturdy enough to help change the height.
• Place the microscope on a Monitor Mate lifter. Adjustable from 3 ¾” to 10 ¾” above the desk.
• Angle the microscope forward by using an empty 2-inch binder. The microscope should be strapped down with Q-Brace straps.
• Purchase user adjustable furniture.

5. Forearm support

• Place a gel pad wrist rest along the sides of the microscope to reduce using awkward wrist and forearm postures while working with specimens under the microscope.
• Alimed offers the microscope forearm support and Ergorest arm support.

6. Adjustable footrest

• WorkRite Model 215 Wide.

7. Anti-fatigue mat

• Standers Choice Health Mats.

8. Hand tool modifications

9. Height adjustable chairs

• Steelcase Criterion High Task Stool
• Office Master WS- 15 Sit/Stand Stool
  

Back to Laboratory Ergonomics Table of Contents >